Custom Garage Door Design & Install in Orange County, CA

When the opening is not a standard size, which is common in older Orange County properties and in anything built before standardisation; when the architecture demands a specific style that stock ranges do not cover; or when a design review requires a particular appearance. If your opening is standard and the style you want exists in a catalogue, a stock door fitted properly will serve you just as well for less, and we will tell you that.

Manufacturing lead times run weeks rather than days, and longer for solid wood or unusual sizes. Add the approval process where an association or a historic district is involved, because approval comes before the order and both have their own timelines. If you have a date you are working toward, tell us at the start so we can work backwards honestly rather than optimistically.

Only if the weight matches, and this is where cheap installations go wrong. Springs are sized to the actual weight of the door, so fitting a heavier insulated or solid wood door on springs sized for a light uninsulated one means the springs fail early and the opener strains. A proper quote prices the spring system alongside the door rather than reusing whatever is there. If a bid looks unusually low, this is usually what has been left out.

Both are regular work here, particularly on estate properties in Villa Park, Orange Park Acres, Nellie Gail and the Newport Coast communities. Oversized doors need engineered spring systems sized to the actual weight rather than a catalogue pairing, and high-lift or vertical-lift tracks change the hardware and often the opener, typically to a jackshaft unit. These are planned installations rather than variations on a standard one.

On an association-governed street, almost certainly, and the ORDER matters. Under California's Davis-Stirling Act, architectural review typically covers door style, panel design, colour and visible hardware. Approval first, then the order, because a door fitted without it can be required to come out at the owner's cost. In historic districts a separate preservation approval applies as well, and in coastal-zone properties the California Coastal Commission may need to approve before the city processes permits.

It depends on the address and on whether the opening itself is altered. Whether a LIKE-FOR-LIKE replacement, swapping a door for one of the same size, weight class and mounting, needs a permit is decided by your city, and it should not be assumed to be exempt. STRUCTURAL MODIFICATION, widening or heightening the rough opening and altering framing or headers, generally requires a permit. Your city confirms it for your address, and a permitted job must go to a licensed contractor regardless of size.

C-61/D-28, Doors, Gates and Activating Devices. That is the CSLB classification covering sectional doors, spring systems, operators and safety devices. C-28 is Lock and Security Equipment and is NOT the garage door license, which is worth knowing when you compare bids. Any license can be checked free at cslb.ca.gov. Urgent Garage Doors holds California license #1055150.